[Solved] Let the disturbing mass be 50 Kg, with radius of rotation = 0.1m, if one of the balancing mass is 30 Kg at a radius of rotation 0.1m then find the other balancing mass situated at a distance of 0.2m.

Q.	Let the disturbing mass be 50 Kg, with radius of rotation = 0.1m, if one of the balancing mass is 30 Kg at a radius of rotation 0.1m then find the other balancing mass situated at a distance of 0.2m.
A.	80
B.	40
C.	20
D.	10
Answer» D. 10

1.5k

Do you find this helpful?

View all MCQs in

Dynamics of Machinery

Discussion

No comments yet

Related MCQs

Let the disturbing mass be 100 kg and the radius of rotation be 10 cm and the rotation speed be 50 rad/s, then calculate the centrifugal force in kN.
Let the disturbing mass be 200 kg and the radius of rotation be 20 cm and the rotation speed be 50 rad/s, then calculate the centripetal force in kN.
Let the centrifugal force in kN be 25 and the radius of rotation be 20 cm and the rotation speed be 50 rad/s, then calculate the mass defect in Kg.
From the given data, find the balancing mass’s inclination in degrees if r=0.2m required in the same plane.Masses = 200kg, 300kg, 240 kg, 260Kg,
From the given data, find the balancing mass in Kg if r=0.2m required in the same plane.Masses = 200kg, 300kg, 240 kg, 260Kg, corresponding radii = 0.2m, 0.15m, 0.25m and 0.3m.Angles between consecutive masses = 45, 75 and 135 degrees.
Which of the following statements are associated with complete dynamic balancing of rotating systems? 1. Resultant couple due to all inertia forces is zero. 2. Support reactions due to forces are zero but not due to couples . 3. The system is automatically statically balanced. 4. Centre of masses of the system lies on the axis of rotation.
For a two rotor system, the mass moment of inertia of one shaft(A) is twice the other(B), then what is the relation between the length of the shafts.
A vertical spring-mass system has a mass of 0.5 kg and an initial deflection of 0.2 cm. Find the spring stiffness.
A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a single node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2
A single cylinder oil engine works with a three rotor system, the shaft length is 2.5m and 70mm in diameter, the middle rotor is at a distance 1.5m from one end. Calculate the free torsional vibration frequency for a two node system in Hz if the mass moment of inertia of rotors in Kg-m2 are: 0.15, 0.3 and 0.09. C=84 kN/mm2