In case of __________ boiling, the bubbles formed on a submerged hot surface get absorbed in the mass of the liquid.

Related MCQs

• If the bubbles formed on a submerged hot surface get absorbed in the mass of liquid, the process of boiling is termed as
• In case of __________ boiling, the liquid temperature is below the saturation temperature and the boiling takes place in the vicinity of the heated surface.
• 1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the liquid is 1500 W/m2.°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be
• A liquid is boiling in a a air tight vessel. Using an exhaust tube, the vapour is pumped out at a faster rate. What happens to the liquid?
• Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water.
• Boiling of milk in an open vessel is an example of __________ boiling.
• A hot liquid is kept in a big room. The logarithm of the numerical value of the temperature difference between the liquid and the room is plotted against time. The plot will be very nearly a/an
• A liquid to liquid counterflow heat exchanger is used to heat cold fluid from 50?C to 150?C. Assuming that the hot fluid enters at 250?C and leaves at 200?C, the log mean temperature difference for the heat exchanger will be closer to
• Two bodies one hot and the other cold are kept in vacuum. What will happen to the temperature of the hot body after sometime?
• Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because