Crank effort is the product of crank pin radius and  

Related MCQs

• In a slider crank mechanism, the length of the crank and connecting rod are 180 mm and 540 mm respectively. The crank position is 45° from inner dead centre. The crank shaft speed is 450 r.p.m. (clockwise), calculate angular velocity of the connecting rod in rad/s.
• The relation between stroke punch s and radius of crank r is  
• If the stroke punch is 100mm, find the radius of the crank in mm.
• In a locomotive, the ratio of the connecting rod length to the crank radius is kept very large in order to
• For the given data of an Internal combustion engine : Mass of parts = 180 kg bore = 175 mm, length of stroke = 200 mm, engine speed = 500 r.p.m., length of connecting rod = 400 mm and crank angle = 60° from T.D.C, find the inertia force.
• The pin that clears the control word register of 8255 when enabled is
• Which pin of the LCD is used for adjusting its contrast?
• The RS pin is                    for an LCD.
• Piston effort acts along the line of stroke.
• When the piston is accelerated, the piston effort is given by which of the following the equation?