In a heat engine cycle, which of the following process occurs?

Related MCQs

• A heat engine is supplied with 250 kJ/s of heat at a constant fixed temperature of 227°C. The heat is rejected at 27°C. The cycle is reversible, if the amount of heat rejected is
• A heat engine using lake water at 12° C as source & the surrounding atmosphere at 2°C as sink executes 1080 cycles per min. If the amount of heat drawn per cycle is 57J, then the output of the engine will be
• A simple Rankine cycle produces 40 MW of power, 50 MW of process heat and rejects 60 MW of heat to the surroundings. What is the utilization factor of this co generation cycle neglecting the pump work?
• A power cycle using steam as working fluid consist of i) constant pressure heat addition ii)adiabatic expansion iii) constant pressure heat rejection & iv) adiabatic compression. The cycle is
• An inventor claims that a new heat cycle will develop 0.4 kW for a heat addition of 32.5 kJ/mm. The temperature of heat source is 1990 K & that of sink is 850K. Is his claim true?
• In a cyclic heat engine operating between a source temperature of 600°C & a sink temperature of 20°C, the least rate of heat rejection per kW net output of the engine is
• One reversible heat engine operates between 1600 K & T₂ K & another reversible heat engine operates between T₂ K & 400 K. If both the engines have the temperature T₂ must be equal to
• Correlate the following statements i) the volume of water into which steam is condensed in condenser is very much smaller than the volume of steam before condensation ii) the net work of a Rankine cycle is heat supplied in boiler - heat rejected to condenser - pump work
• In a reheat Rankine cycle steam with enthalpy of 3300 kJ/kg is expanded in h.p turbine to a state where enthalpy is 2650 kJ/kg. The steam is further expnaded from a state where enthalpy is 2950 kJ/kg to enthalpy of 2525 kJ/kg & latent heat of 2201 kJ.kg. The work of the cycle & amount of reheat respectively are
• a heat engine receives heat at the rate of 1500 kJ/min.& gives an output of 8.2 kW. Its thermal efficiency is equal to