The safe stress for a hollow steel column which carries an axial load of 2100 kN is 125 MN/m2. if the external diameter of the column is 30cm, what will be the internal diameter?

Related MCQs

• Two steel rods connected by cotter joint are subjected to 50 kN load each. What is the minimum diameter required of the rods? (Given: Yielding Stress= 400N/mm² ; Factor of Safety=6)
• Calculate the diameter of pin from shear consideration with maximum shear stress allowed is 40NN/mm² and an axial tensile force of 50kN is acting on the rod.
• If knuckle joint is to fail by crushing failure of pin in fork, then determine the diameter of knuckle pin when 50kN axial tensile force act on rods. Given: Max allowable compressive stress=25N/mm², thickness of each eye of fork=25mm.
• The strength of hollow shaft is more than the strength of solid shaft of same weight.
• The stiffness of solid shaft is more than the stiffness of hollow shaft with same weight.
• Solid shaft is costlier than hollow shaft of same weight.
• Hollow saddle key is superior to flat saddle key as far as power transmitting capability is concerned.
• Stress intensity factor is the critical value of stress at which crack extension occurs.
• Which stress comes when there is an eccentric load applied?
• A curved beam with eccentricity 0.02D is loaded with 1kN.Centroidal radius=4D and inner and outer radii are 3.5D and 4.5D respectively. Area of cross section is 0.8D². Find the dimension D if allowable stress is 110N/mm² and considering only direct tensile stress.