8’CW from the vertical. Hence net shear force = √ [5000cos36.8+1250]²+ [5000sin36.8]².

Related MCQs

• Calculate the diameter of pin from shear consideration with maximum shear stress allowed is 40NN/mm² and an axial tensile force of 50kN is acting on the rod.
• If bending moment on point B in horizontal plate is M and in vertical plane is m, then the net bending moment at point B is? "The layout of a shaft supported on bearings at A & B is shown. Power is supplied by means of a vertical belt on pulley B which is then transmitted to pulley C carrying a horizontal belt. The angle of wrap is 180’ and coefficient of friction is 0.3. Maximum permissible tension in the rope is 3kN. The radius of pulley at B & C is 300mm and 150mm"
• A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal.
• Residual stresses are always added in the load stresses and hence are always harmful.
• If yielding strength=400N/mm², the find the permissible shear stress according to ASME standards.
• Which bolt is under maximum shear stress?
• Arrange the bolts in order of decreasing shear stresses.
• The helical spring ad wire of helical torsion spring, both are subjected to torsional shear stresses.
• While designing a forging, the profile is selected such that the fibrous lines are parallel to the tensile forces and perpendicular to shear forces.
• If allowable shear stress in the shaft is 70N/mm² and torsional and bending moments are M=1185000N-mm and m=330000N-mm, find the diameter of the shaft.