Arrange the bolts in order of decreasing shear stresses.

Related MCQs

• Refer to fig. Two plates are fastened by means of two bolts. The yield strength of bolt is 400N/mm² and factor of safety is 4. Determine the permissible shear stress in the bolts.
• Refer to fig Two plates are fastened by means of two bolts. The yield strength of bolt is 400N/mm² and factor of safety is 4. Determine the size of the bolts.
• Determine the size of the bolts if yield strength of bolt is 400N/mm² and factor of safety is 4. The bolts are equidistant having separated by 60mm and the margin to the left and right is 25mm. Also P=5kN acts at a distance of 200mm from the channel.
• Determine the secondary shear stress acting on the bolt 3 and its direction. The bolts are equidistant having separated by 60mm and the margin to the left and right is 25mm.Also P=5kN acts at a distance of 200mm from the channel.
• Residual stresses are always added in the load stresses and hence are always harmful.
• The helical spring ad wire of helical torsion spring, both are subjected to torsional shear stresses.
• Calculate the diameter of pin from shear consideration with maximum shear stress allowed is 40NN/mm² and an axial tensile force of 50kN is acting on the rod.
• All type of stresses vanishes after as soon as the applied load is removed.
• Cotter joint is used when the members are subjected to which type of stresses?
• If spring index=2.5, what can be concluded about stresses in the wire?