Due to the centrifugal force acting on the rim, the flywheel arms will be subjected to

Related MCQs

• The tensile stress in the flywheel rim due to the centrifugal force acting on the rim is given by
• The cross-section of the flywheel arms is usually
• Calculate the diameter of pin from shear consideration with maximum shear stress allowed is 40NN/mm² and an axial tensile force of 50kN is acting on the rod.
• A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal.
• The diameter of the hub of the flywheel is usually taken
• If E = Mean kinetic energy of the flywheel, CS = Coefficient of fluctuation of speed and Δ E = Maximum fluctuation of energy, then
• In order to find the maximum bending moment on the arms, it is assumed as a
• Determine the secondary shear stress acting on the bolt 3 and its direction. The bolts are equidistant having separated by 60mm and the margin to the left and right is 25mm.Also P=5kN acts at a distance of 200mm from the channel.
• A               bearing supports the load acting along the axis of the shaft.
• Cotter joint is used when the members are subjected to which type of stresses?