[Solved] According to ASTM E709-95 the alkalinity of conditioned water shall not exceed:

McqMate

Q.	According to ASTM E709-95 the alkalinity of conditioned water shall not exceed:
A.	10.0 pH
B.	10.5 pH
C.	11.0 pH
D.	11.5 pH
Answer» B. 10.5 pH

1.2k

1

Do you find this helpful?

20

View all MCQs in

Non Destructive Testing and Evaluation

Discussion

A

Aqil
3 years ago

Thank You

0

Related MCQs

According to ASTM E709-95 the viscosity limit (measured in centi Stokes) of the wet medium (conditioned water) should not exceed:
According to ASTM E709-95 in using prod technique, prod spacing shall not exceed:
According to ASTM E709-95 and API, the thickness of non conductive coatings will not exceed:
According to ASTM E709-95 when dry particles are used magnetic particle testing shall not be performed on the surface of parts whose temperature exceeds:
According to ASTM E709-95, the UV intensity shall not be less than:
According to ASTM E709-95 and API, the UV intensity measured at a minimum of 38 cm (15 inches) at least shall not be less than:
According to ASTM E709-95 in using prod technique on a 50 mm thickness plate with a prod spacing of 101 mm (4 inches), current shall be selected in the following range:
According to ASTM E709-95 the UV light shall be centred on (1 Å = 10-10m):
According to ASTM E709-95 when fluorescent particles are used, the UV light intensity shall be above:
According to ASTM E709-95 when fluorescent particles are used, the bulb shall be warmed up prior to use for at least: