According to AST M E709-95 and API, after removing magnetization of parts after examination, the residual magnetism shall not exceed (1 gauss = 0.0001 tesla):

Related MCQs

• According to ASTM E709-95, with wet continuous magnetization technique, the duration of magnetization current is of the order of:
• According to ASTM E709-95 and API, the thickness of non conductive coatings will not exceed:
• According to ASTM E709-95 and API, the UV intensity measured at a minimum of 38 cm (15 inches) at least shall not be less than:
• According to ASTME 709-95 and API, in order to eliminate all contaminants, an appropriate cleaning shall be performed on all the surfaces to be examined and on a minimum of adjacent material:
• According to ASTM E709-95 and API, when fluorescent particles are used, the UV bulb shall warm up prior to use for at least:
• According to ASTM E709-95 before turning off current and examination, dry powder in excess shall be:
• According to ASTM E709-95 in using prod technique, prod spacing shall not exceed:
• According to ASTM E709-95 the alkalinity of conditioned water shall not exceed:
• According to ASTM E709-95 when applying fluorescent magnetic particles technique, the operator shall be in darkness area at least......................prior to examination:
• The magnetism which remains in a piece of magnetisable material after the magnetising force has been removed is called the: