A beam of radiation consisting of a single wavelength is known as: (choose one)

Related MCQs

• The amount of X radiation or gamma radiation is often spoken of as the of the radiation:
• How is the wavelength of scattered radiation compared to the primary beam?
• How is the wavelength of scattered radiation related to the primary beam?
• Dyes which receive light at one wavelength and re-emit light of another wavelength are called:
• A radiation producing device which emits radiation of one or a few discreet wavelengths is:
• If the radiation intensity is 5.9 Gy/h (590 R/h) at a distance of 30.5 cm (1 foot) from a source, how far is it to the point where the radiation intensity is 0.02 Gy/h (2R/h)?
• If the radiation intensity is 5 Gy/h (500 R/h) at a distance of 152.4 cm (5 feet) from a source, how far is it to the point where the radiation intensity is 0.05 Gy/h (5 R/h)?
• The half value layer of lead for Co-60 is approximately 13 mm (0.5 in). If the radiation level on the source side of a 38 mm (1.5 in) lead plate is 0.64 Gy/h (64 R/h):, the radiation level on the opposite side is:
• At 61 cm (two feet) from a radiation source, radiation intensity is 3 Gy/h (300 R/h). What is the Intensity at 244 cm (8 feet) from the source?
• A radiographic exposure with 3700 GBq (100 Ci) source of Ir-192 using source to film distance of 60 cm results in a radiation intensity of 0.12 Gy/h (11.8 R/h) and a radiographic density of 2.5. The intensity of radiation needed to obtain the same density when the source to film distance is changed to120 cm is: