If diameter of a reinforcement bar is d, the anchorage value of the hook is

Related MCQs

• The radius of a bar bend to form a hook, should not be less than
• The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than
• The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than
• If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is
• If no compression steel is used, two suspended bars of minimum ______ diameter should be used to support shear reinforcement
• The maximum diameter of a bar used in a ribbed slab, is
• If the average bending stress is 6 kg/cm2 for M 150 grade concrete, the length of embedment of a bar of diameter d according to I.S. 456 specifications, is
• If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than
• Lapped splices in tensile reinforcement are generally not used for bars of size larger than
• Minimum spacing between horizontal parallel reinforcement of the same size should not be less than