The minimum reinforcement using mild steel in slab should not be less than

Related MCQs

• The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than
• Minimum spacing between horizontal parallel reinforcement of the same size should not be less than
• Minimum spacing between horizontal parallel reinforcement of different sizes, should not be less than
• In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as
• The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than
• If no compression steel is used, two suspended bars of minimum ______ diameter should be used to support shear reinforcement
• In a slab, the pitch of the main reinforcement should not exceed its effective depth
• As per IS : 456, the reinforcement in a column should not be less than
• If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is
• The amount of reinforcement for main bars in a slab, is based upon