Pitot tube is consists of a glass tube bent through

Related MCQs

• ____________ is defined as a phenomenon of rise or fall of a liquid in a small tube, when the tube is held vertically in the liquid.
• Liquid is flowing through 200 mm diameter tube with mean velocity of 2 m/sec. If density of liquid is 912 kg/m3 and viscosity is0.38 N.S/m2 find type of flow.
• The diameters of a pipe at the sections 1 and 2 are 10 cm and15 cm respectively. Find the discharge through the pipe if the velocity of water flowing through the pipe at section 1 is 5 m/s.
• From following which equation is used to measure negative pressure in u-tube manometer
• A simple manometer containing mercury is used to measure pressure of oil (sp. gr. 0.8) flowing in a pipe as shown below. Mercury level in open tube is 150 mm higher than that on left limb. If height of oil in left limb is 90 mm, determine the pressure in terms of head of water in a pipe.
• The instantaneous pictures of the position of all fluid particles, which have passed through a given point at some previous time, are called
• The diameters of a pipe at the sections 1 and 2 are 10 cm and15 cm respectively. The velocity of water flowing through the pipe at section 1 is 5 m/s. Determine the velocity at section 2.
• An opening in a tank or vessel through which the liquid flows out is known as
• Water is flowing through a rectangular notch, having base width 500 mm and head over it is 160 mm. Find discharge of notch if Cd = 0.6.