On state voltage drop across thyristor used in a 230 V supply system is of the order:

Related MCQs

• A single-phase voltage controller, using one SCR in anti parallel with a diode, feeds a load R and Vs = 230 V. For a firing angel of 90° for the SCR, the PMMC voltage connected across R would read
• A single phase half wave converter is used to charge a battery of 50 V. The thyristor is continuously fired by dc signal. Input voltage is v = Vm sin ωt. The thyristor will conduct
• A single phase half wave converter is feeding a resistive load. Just before triggering, the voltage across thyristor is
• A thyristor is reverse biased. A positive gate pulse is applied. The thyristor
• In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be
• A single phase voltage controller has input of 230 V and a load of 15 Ω resistive. For 6 cycles on and 4 cycles off, determine the average value of SCR current.
• A single-phase half-wave thyristor circuit with R load is triggered at an angle of α = 0°. As such, the maximum value of the average output voltage would be given by Consider Vs = Vm sinωt.
• A thyristor has its gate current zero. To start conduction the forward voltage must exceed
• In a thyristor, the forward breakover voltage
• The on - state voltage drop of IGBT consists of