A single phase half wave controlled rectifier circuit has an R-L load. A freewheeling diode is also in the circuit. When freewheeling diode is conducting the SCR

Related MCQs

• A single-phase voltage controller, using one SCR in anti parallel with a diode, feeds a load R and Vs = 230 V. For a firing angel of 90° for the SCR, the PMMC voltage connected across R would read
• A single phase half wave rectifier is feeding a resistive load. When a = 0, dc output voltage is 127 V. When a = 30°, the dc output voltage will be about
• In a single phase full wave rectifier, during blocking state the peak inverse voltage of diode is
• In a single phase half-wave thyristor circuit with R load & Vs=Vm sinωt, the maximum value of the load current can be given by
• In a 3 phase semiconverter, the freewheeling diode comes into operation only if firing angle
• A single-phase half-wave thyristor circuit with R load is triggered at an angle of α = 0°. As such, the maximum value of the average output voltage would be given by Consider Vs = Vm sinωt.
• In a 3 phase half wave rectifier, when firing angle is less than 90 degree, then the average dc output voltage becomes
• A single phase fully controlled bridge rectifier is fed by a source having inductance. The output voltage during overlap period is
• A single phase voltage controller has input of 230 V and a load of 15 Ω resistive. For 6 cycles on and 4 cycles off, determine the average value of SCR current.
• A single phase half wave converter is feeding a resistive load. Just before triggering, the voltage across thyristor is