A thyristor has a turn on time of 6 μs. If the anode circuit is inductive, the turn on time will be

Related MCQs

• In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be
• If ton and toff are the turn on and turn off times of a thyristor, then
• The curve between V and I of SCR when anode is positive w.r.t cathode and when anode is negative w.r.t cathode are known as
• In case of the two-transistor model (T1 & T2) of GTO with anode-short, the anode-short is placed between the
• An SCR is triggered at 40° in the positive half cycle only. The average anode current is 50 A. If the firing angle is changed to 80°, the average anode current is likely to be
• In a thyristor, the magnitude of the anode current will:
• In a thyristor the gate lead is connected to the n layer near the p layer to which anode is connected.
• A thyristor is reverse biased. A positive gate pulse is applied. The thyristor
• A single phase half wave converter is used to charge a battery of 50 V. The thyristor is continuously fired by dc signal. Input voltage is v = Vm sin ωt. The thyristor will conduct
• The GTO (gate turn-off thyristor) is a