At a rail joint, the ends of adjoining rails, are connected with a pair of fish plates and

Related MCQs

• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• Bending of rail ends due to loose packing under a joint and loose fish Bolts, is known
• When the rail ends rest on a joint sleeper, the joint is termed as
• Number of fish bolts per fish plate is
• On a straight railway track, absolute levels at point A on two rails are 100.550 m and 100.530 m and the absolute levels at point B 100 m apart are 100.585 m and 100.515 m respectively, the value of twist of rails per metre run, is
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and
• Fish plate is in contact with rail at
• Which one of the following rail failures is caused by loose fish bolts at expansion joints?
• If the stock rails are B.H. rails, the type of switch generally provided, is