If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is

Related MCQs

• If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is
• An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is
• For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is
• A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
• For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
• A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is
• An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is
• A part of the slab may be considered as the flange of the T-beam if
• If the maximum bending moment of a simply supported slab is M Kg.cm, the effective depth of the slab is (where Q is M.R. factor)
• An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is