A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is

Related MCQs

• For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
• If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is
• If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
• For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed
• For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is
• A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is
• If d and n are the effective depth and depth of the neutral axis respectively of a singly reinforced beam, the lever arm of the beam, is
• A singly reinforced concrete beam of 25 cm width and 70 cm effective depth is provided with 18.75 cm2 steel. If the modular ratio (m) is 15, the depth of the neutral axis, is
• An R.C.C. beam of 25 cm width and 50 cm effective depth has a clear span of 6 metres and carries a U.D.L. of 3000 kg/m inclusive of its self weight. If the lever arm constant for the section is 0.865, the maximum intensity of shear stress, is
• If the length of an intermediate span of a continuous slab is 5m, the length of the end span is kept