An R.C.C. column is treated as long if its slenderness ratio is greater than

Related MCQs

• An R.C.C. column is treated as short column if its slenderness ratio is less than
• If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is
• A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds
• If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where is the distance of centre of gravity of column loads).
• If Ac, Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is
• A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is
• Steel bars are generally connected together to get greater length than the standard length by providing
• Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than
• The length of the lap in a compression member is kept greater than bar diameter x (Permissible stress in bar / Five times the bond stress) or
• For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed