For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed

Related MCQs

• If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
• For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
• A continuous beam shall be deemed to be a deep beam if the ratio of effective span to overall depth, is
• If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2 , the length of the beam having nominal reinforcement, is
• The maximum ratio of span to depth of a slab simply supported and spanning in one direction, is
• The maximum ratio of span to depth of a slab simply supported and spanning in two directions, is
• The pitch of the main bars in a simply supported slab, should not exceed its effective depth by
• If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is
• A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 , the area of steel required, is
• For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is