Steel beam theory is used for

Related MCQs

• If the modularratio is , steel ratio is and overalldepth of a beam is , the depth ofthe critical neutral axis of the beam, is
• An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is
• In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called
• A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 , the area of steel required, is
• According to the steel beam theory of doubly reinforced beams
• The system in which high tensile alloy steel bars (silica manganese steel) are used as prestressing tendons, is known as
• is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is. The minimum stress on the beam subjected to a maximum bending moment is
• An R.C.C beam of 25 cm width has a clear span of 5 metres and carries a U.D.L. of 2000kg/m inclusive of its self weight. If the lever arm of the section is 45 cm., the beam is
• Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds
• A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is