a nickel stell has engineeringnstress of 610 N/mm2 . The reduction in area of cross section at the fracture was 38 %. The true stress in the material is                          

Related MCQs

• the resolved shear stress of a unit cell in nickel is N/mm2 if a tensile stress of 13.7 Mpa is applied. Take angle between the axial force and slip direction is 450 and angle between axial force and normal to slip is 540
• the sucspectbility of material for brittle fracture under triaxia state of stress is found by test
• if engineering stress for a material is 250 Mpa and engineering strain is 0.2 , then true stress is                  
• an aluminium tensile test specimen has reduction area of 44%. Its true strain is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• any sudden change in cross section leads to the formaiton of area
• during the tensile test, the length of specimen and its cross section area
• the material which does not show the predefined yield stress, the yield stress can be determined by                        
• The property of the material which enables the formation of permanent deformation without fracture is known as
• during compression test, the point at which fracture initiates in material is called as