during compression test, the point at which fracture initiates in material is called as

Related MCQs

• during compression test, the point at which the material breaks into small pieces is called as                       
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• the sucspectbility of material for brittle fracture under triaxia state of stress is found by test
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is                     
• compression test gives best results for                material
• during compression test, stress distribution is non-uniform because of                        
• The property of the material which enables the formation of permanent deformation without fracture is known as
• hourglass fracture is observed in                        test
• a nickel stell has engineeringnstress of 610 N/mm2 . The reduction in area of cross section at the fracture was 38 %. The true stress in the material is