during the tensile test, the length of specimen and its cross section area

Related MCQs

• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is                     
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• A tensile test specimen has cross section
• an aluminium tensile test specimen has reduction area of 44%. Its true strain is
• for measuring the elongation of specimen on UTM during tensile test is used
• a compression test specimen has                         cross section
• during tensile test, if gauge length                   percentage elongation increases due to localised elongation
• a concrete specimen of square cross section is subjected to a force of 100 kN. A side of square is 75 mm. if strain in concrete block is 1.5 x 10-3, the value of youngs modulus for concrete is                       
• in charpy impact test, the length of specimen between he anvils is