the sucspectbility of material for brittle fracture under triaxia state of stress is found by test

Related MCQs

• the tendancy of ductile material to fail as brittle material when it is notched is called as
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• a nickel stell has engineeringnstress of 610 N/mm2 . The reduction in area of cross section at the fracture was 38 %. The true stress in the material is                          
• during compression test, the point at which fracture initiates in material is called as
• brittle material shows toughness
• for brittle material its                       
• the temperature at which ductlie material fails in brittle manner is called as                  temperature
• the factor which is responsible for failure of ductile material in brittle manner is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. Its elongation is
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If ultimate tensile load is 8000 kg, the UTS is