an Aluminium plate of thickness 10 mm is subjected to a force 'F' . If yield strength of aluminium is 150 N/mm2 and width of plate is 60 mm, force F is kN

Related MCQs

• a copper of thickness 10 mm is subjected to a lod of 10000 N. if yield strength of copper is 150 then, the width of plate is                
• if yield trength of metal plate is σ under load P then the width of plate is . Take 't' as thickness of plate
• an aluminium specimen is subjected to a stress of 160 /mm2 and corressponding modulus of resilience is 0.128 Mpa. Youngs modulus for aluminium is             
• tensile test was conducted on a steel specimen of diameter 20 mm and gauge length 75 mm. the gauge length and diameter during fracture are 95 mm and 12 mm respectively. If load at upper yield point is 500 kg, the upper yield stress is
• Recrystallization temperature of aluminium is 150˚ C and that of copper is:
• the material which does not show the predefined yield stress, the yield stress can be determined by                        
• in hydrogen embrittlement if the pressure of molecular hydrogen is greate rhan the yield strength of the material                        
• a concrete specimen of square cross section is subjected to a force of 100 kN. A side of square is 75 mm. if strain in concrete block is 1.5 x 10-3, the value of youngs modulus for concrete is                       
• the resolved shear stress of a unit cell in nickel is N/mm2 if a tensile stress of 13.7 Mpa is applied. Take angle between the axial force and slip direction is 450 and angle between axial force and normal to slip is 540
• what is nature of oxide film formed on the aluminium and copper metal due to reaction with atmosphere