A ship strikes the berth generally at an angle

Related MCQs

• When a ship floats at its designed water line, the vertical distance from water line to the bottom of the ship is known as
• When a wave strikes a vertical breakwater in deep water, it is reflected back and on meeting another advancing wave of similar amplitude merges and rises vertically in a wall of water. This phenomenon is called
• For designing the dock, the proportion of ship load assumed to be borne by keel blocks is
• A ship is berthed in a chamber and lifted by principles of buoyancy, such a chamber is called.
• The minimum diameter of turning besin, where ships turn by going ahead and without tug assistance should be (L is the length of the ship)
• Which one of the following lines is used for tying a ship with a dock?
• Dead weight tonnage of a ship (i) Varies with latitude and season (ii) Is more than displacement tonnage (iii) Is the difference between displacement load and displacement light Of these statements
• The maximum harbour depth below lowest low water is generally equal to (i) Loaded draft +1.2 m when bottom is rock (ii) Loaded draft +1.8 m when bottom is soft (iii) Loaded draft +1.2 m when bottom is soft (iv) Loaded draft +1.8 m when bottom is rock Of these statements
• If H is the height of the wave expected, then the height of the breakwater is generally taken as