Failure of a slope occurs only when total shear force is

Related MCQs

• For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3, C = 2.5 t/m2, the critical height of the slope of the soil, is
• The maximum pressure which a soil can carry without shear failure, is called
• A triaxial shear test is preferred to direct shear test, because
• For shear strength, triaxial shear test is suitable because
• If the cohesive force (c), is 1.5 t/m2, the density ) of the soil is 2.0 t/m3, factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope is
• Failure of the stability of slopes, generally occurs along
• If Nf, Nd and H are total number flow channels, total number of potential drops and total hydraulic head differences respectively, the discharge q through the complete flow is given by (where K is a constant)
• If drainage is permitted throughout the test, during the application of both normal, and shear stresses so that full consolidation occurs and no excess pore pressure is set up at any stage of the test, is known as
• The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to
• The slope of isochrone at any point at a given time indicates the rate of change of