The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are

Related MCQs

• The discharge passing over an ogee spillway is given by (where, L is effective length of spillway crest and H is the total head over the spillway crest including velocity head.)
• As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at
• In a chute spillway, the flow is usually
• When the difference in weir crest and downstream river bed is limited into 3 metres, the weir, generally used is
• The opening in the weir wall with a crest at low level on the canal side is known as under sluice or scouring sluice.
• The crest of the under-sluices should be lower than the crest of the head regulator (if silt excluder is provided by at least
• When the upstream face of a gravity dam is vertical, then the intensity of water pressure at the water surface and at the base respectively will be (where w is unit weight of water and H is the depth of water.)
• The ratio between the depths of water levels over crest on the downstream and upstream of the module, is known as
• When the water is thrown into a well over a crest from where it escapes near its bottom, the type of fall is called
• Study the following statements. i) Levees are constructed parallel to river flow, ii) Spurs are constructed parallel to river flow, iii) Levees are constructed transverse to river flow, iv) Spurs are constructed transverse to river flow. The correct answer is