A prismatic bar of volume V is subjected to a tensile force in longitudinal direction. If Poisson's ratio of the material is u and longitudinal strain is e, then the final volume of the bar becomes

Related MCQs

• A prismatic steel bar 25 cm long is subjected to axial compressive force of 2000 kg. For steel E = 2 x 106 kg/cm2. The ratio of strain energy when the cross-sectional area is 25 sq. cm to that when the cross-section area is 12.5 sq cm, would be
• If a prismatic member with area of cross-section A is subjected to a tensile load P, then the maximum shear stress and its inclination with the direction of load respectively are
• If V is the volume of a rectangular bar subjected to a three dimensional stress state and the Poisson's ratio for the material is 0.5, the change in volume of the bar will be __ _.
• A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be
• Every direct stress is always accompanied by a strain in its own direction and an opposite kind of strain in every direction, at right angles to it. Such a strain is known as
• The Young's modulus of a material is 125 Gpa and Poissons ratio is 0.25. The modulus of rigidity of the material is
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• A bar of length L metres extends by l mm under a tensile force of P. The strain produced in the bar is
• Two bars of different materials and same size are subjected to the same tensile force. If the bars have unit elongation in the ratio of 2 : 5, then the ratio of modulus of elasticity of the two materials will be
• A bar of 30 mm diameter is subjected to an axial force 280 KN length of bar is 400 m and E= 200GPa. Determine volumetric strain if m=4.