If the rivet value is 16.8 kN and force in the member is 16.3 kN, then the number of rivets required for the connection of the member to a gusset plate is

Related MCQs

• A flat carrying a pull of 69C kN is con-nected to a gusset plate using rivets. If the pulls required to shear the rivet, to crush the rivet and to tear the plate per pitch length are 68.5 kN, 46 kN and 69 kN respectively, then the number of rivets required is
• If the rivet value is 2000 N and the force in the member is 2000 N, the number of rivets required for the connection of the member to a gusset plate is
• In a riveted joint, when the rivets in the adjacent rows are staggered in such a way that every rivet is in the middle of the two rivets of the opposite row, the joint is said to be diamond riveted.
• If the tearing efficiency of a riveted joint is 50%, then ratio of rivet hole diameter to the pitch of rivets is
• When two main plates are kept in alignment butting each other and riveted with cover plate on both sides of the main plates with two rows of rivets in each main plate, the joint is known as
• A hole, one metre from the end of a structural steel member, is 0.8 mm shy of matching another hole for possible connection. What force, in kN, is necessary to stretch it for connection? The cross section is 25 mm x 3 mm
• For punching a hole of 25 mm diameter in a plate 20 mm thick, if the shear stress of plate material is 30 kg/mm2, the force required would be
• According to Unwin's formula, the dia¬meter of rivet in mm to suit the t mm thickness of plate is given by
• The distance between the centre of a rivet hole to the nearest edge of plate, is called
• When one plate overlaps the other and the two plates are riveted together with two rows of rivets, the joint is known as