The radius of Mohr's circle for two equal unlike principal stresses of magnitude p is

Related MCQs

• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• At a point in a strained body carrying two unequal unlike principal stresses pi and p2 (Pi > P2X the maximum shear stress is given by
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces of the same magnitude. The stresses induced in the two rods will be in the ratio __ _ .
• The maximum shear stress is equal to the radius of Mohr's circle.
• The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
• Mohr's circle is used to determine the stresses on an oblique section of a body subjected to
• A body is subjected to two normal stresses of 200 kN/m2 (tensile) and 100 kN/m2 (compressive) acting mutually perpendicular to each other. The maximum sher stress is equal to
• Two equal and opposite forces of magnitude 10 kN are applied at the ends of a steel wire to increase its length. The internal force in the wire will be-----KN
• A metal plate of length L and width b has a circle drawn on it. If it is subjected to a compressive stress acting along its width, the circle will
• The direct stress, across a principal plane, is known as principal stress.