Mohr's circle is used to determine the stresses on an oblique section of a body subjected to

Related MCQs

• When a body is subjected to a direct tensile stress (?) in one plane, then normal stress on an oblique section of the body inclined at an angle ? to the normal of the section is
• When a body is subjected to two equal and opposite forces, acting tangentially across the resisting section, as a result of which the body tends to shear off across the section, the stress and strain induced is
• The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
• A metal plate of length L and width b has a circle drawn on it. If it is subjected to a compressive stress acting along its width, the circle will
• A body is subjected to two normal stresses 20 kN / m2 (tensile) and 10 kN / m2 (compressive) acting perpendicular to each other. The maximum shear stress is
• When a body is subjected to three mutually perpendicular stresses, of equal intensity, the ratio of direct stress to the corresponding volumetric strain is known as
• A body is subjected to two normal stresses of 200 kN/m2 (tensile) and 100 kN/m2 (compressive) acting mutually perpendicular to each other. The maximum sher stress is equal to
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces with magnitudes in the ratio 2 : 1. The stresses induced in the two rods will be in the ratio ____ _.
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces with magnitudes in the ratio 1 : 2. The stresses induced in the two rods will be in the ratio ____ _.
• Two rods have uniform cross section areas in the ratio 1 : 2 and are subjected to axial tensile forces of the same magnitude. The stresses induced in the two rods will be in the ratio __ _ .