Maximum bending moment in a beam occurs where

Related MCQs

• The bending moment diagram for a cantilever beam subjected to bending moment at the end of the beam would be
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
• The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called
• A prismatic beam fixed at both ends carries a uniformly distributed load. The ratio of bending moment at the supports to the bending moment at mid-span is
• A rectangular beam 200 mm deep by 100 mm wide-subjected to maximum bending moment of 500 kNm. The maximum stress in the beam will be
• A simply supported beam of length 1 carries a load varying uniformly from zero at left end to maximum at right end. The maximum bending moment occurs at a distance of
• The maximum bending moment for a simply supported beam with a gradually varying load from zero at both ends and w per metre at the centre, lies at the centre of a beam.
• The maximum bending moment due to a moving load on a fixed ended beam occurs
• The maximum bending moment due to a moving load on a fixed ended beam occurs
• The plastic moment of a beam can be 50 percent more than the maximum elastic moment in case the cross-section of the beam is