A cantilever beam AB of length 1 carries a concentrated load W at its midspan C. If the free end B is supported on a rigid prop, then there is a point of contraflexure

Related MCQs

• Two cantilever beams are of equal length. One carries a uniformly distributed load and other carries same load but concentrated at the free end. The ratio of maximum deflection is
• A cantilever beam carries a uniformly distributed load from fixed end to the centre of the beam in the first case and a uniformly distributed load of same inten¬sity from centre of the beam to the free end in the second case. The ratio of deflections in the two cases is
• A simply supported beam 'A' of length l, breadth b and depth d carries a central load W. Another beam 'B' of the same dimensions carries a central load equal to 2 W. The deflection of beam 'B' will be
• A cantilever beam of square section is subjected to a load W at the free end. If the length of the beam is doubled and load reduced to half, the deflection at the free end as compared to original deflection would be
• A cantilever beam of length / carries a gradually varying load from zero at free end and w per unit length at the fixed end. The maximum deflection oes at
• A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be
• A cantilever beam rectangular in cross-section is subbjected to a load W at its free end. If the depth of the beam is doubled and the load is halved, the deflection of the free end as compared to original deflection will be
• If the deflection at the free end of a uniformly loaded cantilever beam is 15mm and the slope of the deflection curve at the free end is 0.02 radian, then the length of the beam is
• A cantilever beam of length 5 m carries a uniformly distributed load of 100 Newtons/m throughout its length. The maximum shearing force in the beam will be
• A prismatic beam of length 1 and fixed at both ends carries a uniformly distributed load. The distance of points of contraflexure from either end is