Which of the following assumes constant molal vaporisation and overflow?

Related MCQs

• If xD = overhead product molal composition and RD = reflux ratio, then slope and intercept of the operating line for rectifying section are respectively
• During constant rate drying period, vaporisation rate per unit drying surface area
• In case of non-ideal gases and liquids, the molal diffusivity
• Unit of molal diffusivity is
• Humidity chart is useful for the solution of problems concerning condensation, vaporisation and air conditioning. At a given dry bulb temperature, value of humidity obtained from the humidity chart directly, is in terms of __________ humidity.
• The solvent used in liquid extraction should not have high latent heat of vaporisation, because
• Heat sensitive materials with very high latent heat of vaporisation may be economically separated using
• A 25 cm × 25 cm × 1 cm flat sheet weighing 1.2 kg initially was dried from both sides under constant drying rate conditions. It took 1500 seconds for the weight of the sheet to reduce to 1.05 kg. Another 1m × 1m × 1cm flat sheet of the same material is to be dried from one side only. Under the same constant drying rate conditions, the time required for drying (in seconds) from its initial weight of 19.2 kg to 17.6 kg is
• Drying of a wet solid under constant drying conditions means the exposure of the wet solid to the air of constant
• During dehumidification of unsaturated air wet bulb temperature & partial pressure of vapor are not constant. However, during evaporative cooling process with recirculated water supply, the __________ remains constant.