Which of the following same diameter columns gives lowest pressure drop per unit height?

Related MCQs

• Which of these columns incurs the lowest pressure drop?
• H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is
• For the gas absorption, the height of a transfer unit, based on the gas phase is given by (G: superficial molar gas velocity, L: superficial molar liquid velocity, FG: mass transfer co-efficient, moles/m2, a: interfacial area per unit volume of tower)
• In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit).
• Pressure drop through plate tower as compared to that through packed tower, for the same duty will be
• At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower.
• For the same system, if the same liquid used in an absorber is decreased, the tower height will
• The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 )
• Which of the following gas-liquid contacting devices incurs the least pressure drop for a particular duty?
• Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower.