If 1 is subtracted from the ratio of yield stress to working stress the quantity obtained is known as

Related MCQs

• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• The yield point in fatique loading as compared to the yield point in static loading is
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• In case of thin walled cylinders the ratio of hoop stress to maximum shear stress stress is
• A material which undergoes no deformation till its yield point is reached and then it flows at a constant stress is known as
• The ratio of ultimate tensile stress to the design stress is known as
• A copper rod 15 mm diameter 0.8 m long is heated through 50?C. The expansion of the rod is prevented by gripping it at both ends. When the grips do not yield, the stress in rod is 115 N/mm2 and forces applied at the grips are 20 kN. In case one of the grip yields by 0.5 mm
• A body is subjected to a direct tensile stress of 300 Mpa in one plane accompanied by a simple shear stress of 200 Mpa. The maximum normal stress will be
• If the magnitude of direct stress and bending stress is equal, then there will be zero stress at one of the extreme ends of a column.