Total elongation produced in a bar due to its self weight is given by……….. Where ρ is the density of material in kg/m3

Related MCQs

• If percentage elongation of a certain specimen made of a material 'A' under tensile test is 30% and the percentage elongation of a specimen with same dimensions made of another material 'B' is 40%, then material 'B' is more ductile than material 'A'.
• The elongation of a conical bar under its own weight is equal to
• The elongation of a conical bar under its own weight is
• The elongation of a conical bar under its own weight is equal to
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.
• The deformation of a steel bar under its own weight as compared to the deformation caused by a direct load equal to the weight of the shaft will be
• If all the dimensions of a prismatic bar are doubled, then the maximum stress produced in it under its own weight will
• A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be
• A bar of length L metres extends by l mm under a tensile force of P. The strain produced in the bar is
• A uniform steel rope 400 metres long is hung vertically. The weight of the steel is 7.8 gm/cm3 and D = 2100 kg/mm2. The ratio of elongation of first 150 metres to that of first 300 metres would be