When a bar is subjected to a change of temperature and its deformation is prevented, which of the following stress is induced?

Related MCQs

• When a bar is subjected to a change of temperature and its deformation is prevented, the stress induced in the bar is
• Whenever some external system of forces acts on a body, it undergoes some deformation. As the body undergoes some deformation, it sets up some resistance to the deformation. This resistance per unit area to deformation, is called
• A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• A bar of copper and steel form a composite system, which is heated to a temperature of 40?C. The stress induced in the copper bar will be
• If V is the volume of a rectangular bar subjected to a three dimensional stress state and the Poisson's ratio for the material is 0.5, the change in volume of the bar will be __ _.
• The deformation of a steel bar under its own weight as compared to the deformation caused by a direct load equal to the weight of the shaft will be
• A rail 20 m long is prevented from expansion at both end . If the temperature is raised by 30 0C, Stress induced in rail is.. E=200 Gpa,α =12x10-6/°C
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• A steel bar ABC (E = 200 GPa) is 1 m long. For AB = 0.7 m, it has cross section P area of 500 mm2 and for BC = 0.3 m the cross section area is 400 mm2. The bar is subjected to an axial pull of 100 kN. The stress is maximum in ___ _