A bar of copper and steel form a composite system, which is heated to a temperature of 40?C. The stress induced in the copper bar will be

Related MCQs

• A bar of copper form a composite system, which is heated to a temperature of 45?C. The stress in the copper bar will be
• If a composite bar of steel and copper is heated, then the copper bar will be under
• If ES = 3 EA , the stress in steel of a composite bar made of aluminium and steel strips each having a cross sectional area of 300 mm2 and subjected to an axial load of 12 kN
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• A brittle steel rod is heated to 160?C and then suddenly clamped at both ends. It is then allowed to cool and breaks at a temperature of 85?C. If E = 200 GN/m2 and ? = 12 x 10-5 / ?C, the breaking stress of steel is
• When a bar is subjected to a change of temperature and its deformation is prevented, the stress induced in the bar is
• A steel strip is welded to a copper strip of the same dimensions along the length. The coefficient of thermal expansion for copper is greater than that for steel. If temperature is increased, ___ .
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.
• A steel bar of 5 mm is heated from 15?C to 40?C and it is free to expand. The bar will induce
• When a bar is subjected to a change of temperature and its deformation is prevented, which of the following stress is induced?