Which of the following beams will develop thermal stress when subjected to a change in temperature ?

Related MCQs

• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• Two beams, one of circular cross-section and the other of square cross-section, have equal areas of cross-sections. When these beams are subjected to bending.
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• A body is subjected to a direct tensile stress of 300 Mpa in one plane accompanied by a simple shear stress of 200 Mpa. The maximum normal stress will be
• When a body is subjected to a direct tensile stress (?), maximum normal stress is equal to the direct tensile stress.
• When a bar is subjected to a change of temperature and its deformation is prevented, which of the following stress is induced?
• When a bar is subjected to a change of temperature and its deformation is prevented, the stress induced in the bar is
• Of the two prismatic beams of same material, length and flexural strength, one is circular and other is square in cross-section. The ratio of weights of circular and square beams is
• Two beams carrying uniformly distributed load have same depth but beams A has width 2nd as compared to width w for beam B. The ratio of elastic strength of beam A compred to that of B will be