The level of both the rails on straight lengths should be different.

Related MCQs

• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• If the stock rails are B.H. rails, the type of switch generally provided, is
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and
• To reduce the wearing of rails, the rails are placed at an
• In supported rail joint, both the ends of adjoining rails are supported on a
• The type of turn-out in which both the turn out rails are movable is known as
• To avoid the damage of nose of crossing, the wing rails are ramped so that nose of crossing remains at a lower level by
• The lengths of the standard crossings in India for Broad gauge and Metre gauge tracks is same for