In supported rail joint, both the ends of adjoining rails are supported on a

Related MCQs

• At a rail joint, the ends of adjoining rails, are connected with a pair of fish plates and
• To hold the adjoining ends of rails in correct horizontal and vertical planes, the rail fastenings used are
• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• When the rail ends rest on a joint sleeper, the joint is termed as
• The impact of the rail wheel ahead of the joint gives rise to the creep of the rail. This statement is according to
• Bending of rail ends due to loose packing under a joint and loose fish Bolts, is known
• Rail joint supported on a single sleeper, is known
• If the stock rails are B.H. rails, the type of switch generally provided, is
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is