When a column is subjected to an eccentric load, the stress induced in the column will be

Related MCQs

• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• A short column of external diameter of 250 mm and internal diameter of 150 mm carries an eccentric load of 1000 kN. The greatest eccentricity which the load can have without producing tension anywhere is
• In a thick cylindrical shell subjected to an internal pressure (p), the tangential stress is always a tensile stress where as the radial stress is a compressive stress
• At a point in a steel member, the major principal stress is 2000 kg/cm2 and the minor principal stress is compressive. If the uni-axial tensile yield stress is 2500 kg/cm2, then the magnitude of the minor principal stress at which yielding will commence, according to the maximum shearing stress theory, is
• A body is subjected to a direct tensile stress of 300 Mpa in one plane accompanied by a simple shear stress of 200 Mpa. The maximum normal stress will be
• When a body is subjected to a direct tensile stress (?), maximum normal stress is equal to the direct tensile stress.
• If a prismatic member with area of cross-section A is subjected to a tensile load P, then the maximum shear stress and its inclination with the direction of load respectively are
• A square steel bar 20 mm on a side is subjected to an axial compressive load of 8 kN. The normal stress acting on plane 30? to the line action of the axial load will be
• When a bar is subjected to a change of temperature and its deformation is prevented, which of the following stress is induced?
• When a body is subjected to two equal and opposite pushes, as a result of which the body tends to reduce its length, the stress and strain induced is compressive.