A steel bar of 5 mm is heated from 15?C to 40?C and it is free to expand. The bar will induce

Related MCQs

• If a composite bar of steel and copper is heated, then the copper bar will be under
• A bar of copper and steel form a composite system, which is heated to a temperature of 40?C. The stress induced in the copper bar will be
• A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be
• A stepped bar of steel consists of a pmormtion with cross section area 500 mm2 connected to a portion with cross section area 1000 2. Each portion has a length of 1 m. The modulus of elasticity of steel is 200 GPa. The maximum elongation of the bar by applying an axial tensile force at the ends without exceeding a stress of 100 MPa is    mm.
• A brittle steel rod is heated to 160?C and then suddenly clamped at both ends. It is then allowed to cool and breaks at a temperature of 85?C. If E = 200 GN/m2 and ? = 12 x 10-5 / ?C, the breaking stress of steel is
• A bar of copper form a composite system, which is heated to a temperature of 45?C. The stress in the copper bar will be
• If ES = 3 EA , the stress in steel of a composite bar made of aluminium and steel strips each having a cross sectional area of 300 mm2 and subjected to an axial load of 12 kN
• A steel bar ABC (E = 200 GPa) is 1 m long. For AB = 0.7 m, it has cross section P area of 500 mm2 and for BC = 0.3 m the cross section area is 400 mm2. The bar is subjected to an axial pull of 100 kN. The stress is maximum in ___ _
• A prismatic steel bar 25 cm long is subjected to axial compressive force of 2000 kg. For steel E = 2 x 106 kg/cm2. The ratio of strain energy when the cross-sectional area is 25 sq. cm to that when the cross-section area is 12.5 sq cm, would be
• A flitched beam consists of a wooden joist 150 mm wide and 300 mm deep strengthened by steel plates 10 mm thick and 300 mm deep one on either side of the joist. If modulus of elasticity of steel is 20 times that of wood, then the width of equivalent wooden section will be