When a body is subjected to two equal and opposite forces, acting tangentially across the resisting section, as a result of which the body tends to shear off across the section, the stress and strain induced is

Related MCQs

• When a body is subjected to two equal and opposite pushes, as a result of which the body tends to reduce its length, the stress and strain induced is compressive.
• When a body is subjected to two equal and opposite pulls, as a result of which the body tends to extend its length, the stress and strain induced is
• A body is subjected to a tensile stress of 1200 MPa on one plane and another tensile stress of 600 MPa on a plane at right angles to the former. It is also subjected to a shear stress of 400 MPa on the same planes. The maximum normal stress will be
• Every direct stress is always accompanied by a strain in its own direction and an opposite kind of strain in every direction, at right angles to it. Such a strain is known as
• The torsional resisting moment of the following section is being considered with identical characteristic parameter. Which section will have maximum torsional resisting moment
• A beam of rectangular cross-section is 100 mm wide and 200 mm deep. If the section is subjected to a shear force of 20 kN, then the maximum shear stress in the section is
• A shear stress across a plane, is always accompanied by a balancing shear stress across the plane and normal to it.
• A solid cube is subjected to equal normal forces of the same type on all its faces. The ratio volumetric strain/liner strain in any of the three xes will be
• A body is subjected to two normal stresses 20 kN / m2 (tensile) and 10 kN / m2 (compressive) acting perpendicular to each other. The maximum shear stress is
• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to