A concentrated load is one which

Related MCQs

• Two cantilever beams are of equal length. One carries a uniformly distributed load and other carries same load but concentrated at the free end. The ratio of maximum deflection is
• A beam ABC rests on simple supports at A and B with BC as an overhang. D is centre of span AB. If in the first case a concentrated load P acts at C while in the second case load P acts at D, then the
• There is always a limiting value of load up to which the strain totally disappears on the removal of load; the stress corresponding to this load is called…………
• A cantilever beam AB of length 1 carries a concentrated load W at its midspan C. If the free end B is supported on a rigid prop, then there is a point of contraflexure
• If the length of a simply supported beam carrying a concentrated load at the centre is doubled, the defection at the centre will become
• A simply supported beam with rectangular cross-section is subjected to a central concentrated load. If the width and depth of the beam are doubled, then the deflection at the centre of the beam will be reduced to
• A uniformly distributed load may be assumed to behave like a point load at the centre of gravity of the load for all sorts of calculations.
• If the working load is one third of the ultimate load, the factor of safety is
• When both ends of a column are fixed, the crippling load is P. If one end of the column is made free, the value of crippling load will be changed to
• A solid circular shaft of diameter D carries are axial load W. If the same load is applied axially on a hollow circular shaft of inner diameter D/2, the ratio of stress in a solid shaft to a hallow one is